@ragus a ja dzisiaj w mediamarkecie trzymałem za(pipi)istego sandiska 64gb 3.0 i zobaczyłem dysk 2.0 HAMA przy kasie 64 GB za 30zł o ten https://mediamarkt.pl/komputery-i-tablety/pendrive-hama-rotate-64-gb?gclid=CjwKEAjwue3nBRCCyrqY0c7bw2wSJACSlmGZxOqXqB-LkTgV0B-a24h99DyjxXgc0HLxmHF2LyFKmhoCM43w_wcB&gclsrc=aw.ds
Sandiska odłożyłem bo był na 3.0 i kupiłem (pipi) od Hama i działa i to szybko nawet.
@Shen
Jedyne co możesz zrobić to przeczytaj to:
Dysk masz dobry bo jak rozumiem przeróbka się wgrała i bootuje do menu.
Jak coś to jest inny sposób na wrzucanie gier kopiujesz na twardy dysk do folderu transfer.
Mi też komp nie chciał czytać za pierwszym razem klasica, restartowałem zmieniałem porty i zaskoczył. Jak coś to jeszcze raz powtórz przeróbkę.
BleemSync v1.1 – How to use BleemSync UI to sync games and change config
Please Note: The BSUI will not work when running in OTG + drag’n’drop mode.
It’s advised you check one of the youtuber how-to videos below for a easier visual and audio based tutorial, but once you have successfully installed BleemSync 1.1 and have your formatted USB ready…
Always make sure you have no power connected when plugging in the USB. (This also includes external power for powered USB hubs!)
Plug your formatted USB (with the bleemsync app and bootloader) into controller port 2 on your console.
Connect your console to your pc using the power USB cable as normal.
When the LED turns ORANGE, turn on the console as normal.
If you already have the RDNIS driver installed you should hear/see a connection sound as the USB device is recognised and the console turns on. If not your OS should automatically install it for you. Note 1 – If you are on MAC you will require to download the driver manually here: https://goo.gl/FQYNW5 Note 2 – If you already use Hakchi CE on your PC you should have the RDNIS driver installed Note 3 – If unsure, plug in and power on and check your device manager. You should see something like: http://prntscr.com/mapcf6
If you have the console connected to HDMI, you want to boot to the boot menu. If HDMI is connected, the UI will only work whilst you are waiting on the Boot Menu screen. Note 1 – The console is set to boot directly to the boot menu by default Note 2 – If you disconnect the HDMI cable the console will always start the on console BleemSync UI
Once you have given the console approximately 10 seconds from turning on, open your desired web browser (Internet Explorer is not supported!) The following steps we are currently in the process of improving, please bare with us.
Go and visit http://bleemsyncui.com/ failing that you can try http://169.254.215.100:5000/
Troubleshooting 1 – If your console has not yet properly loaded the BleemSync UI you are likely to see something like: http://prntscr.com/maph2k If this is the case then just wait 5-10 seconds and try again.
Troubleshooting 2 – If you tried for over a minute and still have nothing then you have likely not got the RDNIS driver. Check your device manager to ensure that your driver is installed
Troubleshooting 3 – Might seem dumb but you might have not turned the console on or you don’t have the USB with BleemSync on it connected to the PSC port 2.
Troubleshooting 4 – If your RDNIS is connected and you still don’t have any luck. If you shutdown the PSC and plug your USB in to the PC, check your logs. It’s likely your USB is incompatible or is corrupt.
Troubleshooting 5 – If all else fails, check the how-to videos to make sure you are doing it correct and then send us your logs in the Discord support channel and we will look at it for you. (PLEASE exhaust all other options first)
On Successful load it will take a few seconds and you should now see the BleemSync UI http://prntscr.com/mapphg
You are good to go! Check out one of the YouTube how-to videos below for a more in depth how-to use and add games as it’s too detailed for this guide.